Mounting Plate Dimensions For ARK Xtreme Off-Road Ratcheting Trailer Jack # ARK54FR

Question

Question:

Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels - Item # ARK54FR - Can someone provide the hole spacing dimensions of the mounting plate for this jack? I need to see if it will fit on my welded on plate of my Smittybilt Scout Camp trailer. Thank you

asked by: James R

1

Helpful Expert Reply:

I have included an image below with the measurements for the mounting plate on the Xtreme Off-Road Ratcheting Trailer Jack # ARK54FR. The hole to hole measurements are from center of hole to center of hole.

expert reply by: Bud M

1

Dimensions Of Mounting Plate For Xtreme Off-Road Swing-Up Trailer Jack
(click to enlarge)

Answer 1

The collapsed height of the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is 28-5/8" from the base of the wheel to the top of the jack tube. The tallest measurement of the jack when fully extended is 31-15/16" from the center…

view full answer...

Answer 2

Hey TC, the Ark Xtreme Off-Road Ratcheting Jack w/ 2 Wheels #ARK54FR would likely work well for that assuming the tongue weight is under the max weight limit of 1,100lbs. I did see a review saying it wasn't working too well on a fully loaded…

view full answer...

Answer 3

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

view full answer...

Answer 4

Per the manufacturer The Xtreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind #ORJW1SU has a clearance of roughly 61.55 mm or 2.4 inches. So it will work on your frame. The jack has a sturdy steel construction which is durable and built to…

view full answer...

Answer 5

We have several jacks that fit most of the parameters you mentioned, but the challenge was finding one with a rubber tire. The ARK Extreme Off-Road Ratcheting Trailer Jack, part #ORJW1SU would absolutely check all the boxes. It's not an…

view full answer...

Answer 6

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

view full answer...

Answer 7

Hey Matt, since you have a slight grade I would instead recommend the Trailer Valet 5X part #STC-V211 over the #ORJW1SU. The #ORJW1SU requires releasing tension in the crank that turns the wheel every time you go to crank the wheel further so I would…

view full answer...

Answer 8

The ARK #ORJW1SU Off-Road trailer jack will need about 21-3/4 inches of available space on the trailer tongue. I wasn't able to make out the dimensions on your tape measure in the photo, so I couldn't say judging by that if it'll fit.…

view full answer...

Answer 9

When retracted the Xtreme Off-Road Ratcheting Trailer Jack item #ARK54FR is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is 14". When folded…

view full answer...

Answer 10

With the ARK Xtreme Off-Road Swing-Up Jack #ORJW500D in its lowest position it is 6.49" from the center of the mounting point to the top of the jack. The other end of the jack when fully retracted is going to be 18.89" from the mounting…

view full answer...

Answer 11

There is no weight rating for the Mounting Bracket, part #TV-0002. It is designed to replace the bracket for the Trailer Valet Trailer Jack, part #STC-V211. The Trailer valet has a weight capacity of 500 lbs. You may be able to install a different…

view full answer...

Answer 12

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

view full answer...

Mounting Plate Dimensions For ARK Xtreme Off-Road Ratcheting Trailer Jack # ARK54FR

Product Page this Question was Asked From

Continue Researching