Recommended Flat Towing Set Up for a 1999 Chevy Tahoe 4WD

Published 04/02/2023

Products Featured in This Question

Roadmaster XL Crossbar Style Base Plate Kit - Removable Arms

(71)

$575.00

Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars

(307)

$132.84

Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional

(314)

$1488.91

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3187)

$175.28

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(402)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$70.98

Question:

I have a new older Facon 2 towbar and I would like help with the purchase of the correct base plate for my 1999 Chevy Tahoe 4x4. Thank you.

asked by: Tom S

Helpful Expert Reply:

Since you have the Falcon 2 Towbar item # RM-520 you will need the Roadmaster XL Crossbar Style Base Plate Kit item # 199-1 for your 1999 Tahoe and the Quick Disconnect Crossbar Assembly item # 910021-00 if you don't already have it.

I have listed some other parts you will need to flat tow your Tahoe below along with any installation videos we may have.

Safety Chains - Roadmaster item # RM-643

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.