Lift Kit For Dexter #11 Torflex Axles On a Forest River Rockwood 2442BS 5TH Wheel Camper

Question

Question:

Is there a lift kit available for the rockwoood 2442bs 5th wheel?

asked by: Steve

0

Expert Reply:

It would appear the Forest River Rockwood 2442BS use Tandem Dexter Torflex axles for its suspension. This means you should have the #11 Torflex axles. You can verify this by checking the axle tag on your axles or by measuring the bolt hole spread. The mounting bolts should be 9-1/2" on center which would allow you to use the Torflex Lift Kit # K71-724-02 to get 2-7/8" of lift.

expert reply by: Bud M

0

Answer 1

To lift your Forest River Signature Ultra Lite 8289WS with Torflex axles between 2 and 3 inches, you could use Dexter's Torflex lift kit. Since your Ultra Lite has tandem axles, you would only need to know which number Torflex axles you have to…

view full answer...

Answer 2

Hey Carl, so the easiest option would be to lift the suspension of your 2018 Forest River - Arctic Wolf 285DRL4. For that the Correct Track Tandem Axle Lift kit part #RR23QX would be the simplest solution. This will give you a lift of 2-1/4 inches…

view full answer...

Answer 3

We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles. There will be a tag on the axle shaft that will have the information needed to…

view full answer...

Answer 4

If you had 3 inch brackets it would look like you have a lift kit basically already installed on your trailer. I attached a picture of the #K71-724-02 installed that you can compare to what you have now to see if your setup looks like it would fit…

view full answer...

Answer 5

Yes, you can replace a Reese Revolution with a Reese Goose Box like item #RP85FR . The Reese Revolution pin box is the same pin box as the Reese Sidewinder. It is called a Revolution when it comes as OEM equipment on a trailer. The…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…

view full answer...

Lift Kit For Dexter #11 Torflex Axles On a Forest River Rockwood 2442BS 5TH Wheel Camper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching