Troubleshooting A Furrion Vision S Camera System That Won't Pair

Updated 03/09/2023 | Published 03/08/2023

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(731)

$467.83

12V PWM Filter for RV Backup Camera Systems - Hardwire

(211)

$69.75

Question:

Got the Furrion Vision S back up system. My 2022 Geo Pro was pre-wired and hooking up camera was a breeze and worked fine. Next trip out camera will no longer sync with monitor and no picture. Nothing has changed. Any suggestions.

asked by: Robert C

Expert Reply:

Failure of the monitor to sync with the camera always comes back to powering the unit. Depending on the vehicle you're towing with you could have PWM wiring, which sends a pulsing voltage instead of constant voltage and can cause pairing issues. It's not unheard of that it will just randomly work with no issues and then go back to giving you issues.

This can be solved by installing the # VGR64VR to provide constant voltage to the camera. This adapter will splice in behind your rear camera and provide constant voltage to it to have it properly function. I've attached a video below to help walk you through the installation process.

One other thing people some times forget is that the system is usually powered by the running light circuit so the running lights on the tow vehicle will need to be on the entire time you want the camera powered.

Once you have a constant power source the camera should sync with the monitor automatically, but if not you can go through the pairing process on the monitor and press the little black rubber button on the bottom of the camera to pair them back together.

expert reply by: Kevin C