Recommended 2" Diameter Submersible White LED Light
Updated 02/01/2023 | Published 01/31/2023
Products Featured in This Question
Question:
Hello. Im looking for Qty 6 standard 2 inch round LED side marker lights, submersible but they need to be WHITE light, not red or amber. Also, they need to have that DOT stamp on them. MANY thanks!
asked by: Mike B
Expert Reply:
The best option for a 2" diameter, submersible, WHITE LED light is going to be the Miro-Flex LED Utility Light item # OPT57FR. These won't be stamped DOT approved because they are not reverse lights. We don't have any options that are.
You will want to check with your local highway patrol office to see if you can run white lights on the side of your trailer.
To help with your installation you can use the 2-Wire Pigtail item # A45CB or the Right Angle 2-Wire Pigtail item # A49PB.
Product Page this Question was Asked From
LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Round - Clear Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 2-1/2 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Q&A: Door Hinge for 2001 Exiss Horse Trailer
- Q&A: Choosing/Sizing the Correct Trailer Ramp Spring for a Ramp Door
- Q&A: Recommended Garage Door Spring for a 7' Wide Enclosed Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Oil Seal For Dexter 10,000 lb Hub From 2006 to Replace National 370150BG
- Q&A: US Replacements for Dexter k23-466-00 and k23-467-00 Brake Assemblies
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: Installing the 4-Wire Pigtail of the Optrionics Tail Light # STL68RB to 5 Wires from Vehicle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements