Replacement 10" Brake Fitment on 2018 T@B 320S Trailer
Updated 01/23/2023 | Published 01/21/2023
Products Featured in This Question
Question:
I have a 2018 T@B 320s NOT a Boondock version with 10 x 2 1/4 brakes. Will these work? Code: AKEBRK-35-SA?
asked by: Hal
0
Expert Reply:
Yes, the Electric Trailer Brake Kit # AKEBRK-35-SA has 10" x 2-1/14" brake assemblies that will work great with your 2018 T@B 320S trailer!
If you're also needing to replace the mounting hardware then you can get that with the kit # BRKH10B as well.
Attached are installation and review videos for you to check out.
expert reply by:
Jon G
0
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: How to Add Electric Brakes to a 3,500 lb Lippert Idler Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Replacement Brake Assemblies, Hubs, and Bearing Kit for a Dexter 3,500 EZ Lube Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Can Brakes Be Added To An Enclosed Trailer With A 3,500lb Axle
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes