Menu Icon
fall hauling headquarters

Reverse Lights on 2008 Lincoln MKX Stopped Working After Installing Curt Trailer Wiring Harness

Question:

Installed wiring harness all trailer lights work but now have no reverse lights on 2008 Lincoln mkx

Expert Reply:

If you were to unplug the harness and plug the tail lights back in as normal do the reverse lights work then? If so then there is something wrong inside the wiring harness # C56329 and it will need to be replaced. You can also use harness # 118551.

If the reverse lights still do not work then consult the vehicle owners manual for the location of the fuse and/or relay for the reverse lights and see if it has blown. If it has blown replace the fuse and if it blows again with the wiring harness installed then there is a short inside the converter and it will need to be replaced.

Make sure that the harness and the tail light wiring connectors do not have any bent pins because that too could cause a short.

expert reply by:
Michael H

Ask The Experts a Question >>


Products Referenced in This Question


Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.