Replacement Grease Seal for Trailer Hub that is OD = 1.98 ID = 1.25
Published 01/05/2023
Products Featured in This Question
Question:
I am looking for replacement grease seals for my 2013 Load Rite boat trailer. The ones that I removed are OD = 1.98 ID = 1.25 Thickness = .397. Do you have any that will fit and do you sell Stainless Steel Cotter Pins. Thanks
asked by: Gordon L
Helpful Expert Reply:
Thanks for the dimensions of your seals. Based on that the correct replacement would be the part # RG06-010 for a pair or part # 34823 for a single seal. We have replacement cotter pins like the part # 165649 which is steel but we do not have any stainless steel options.
Product Page this Question was Asked From
Grease Seals - Double Lip - I.D. 1.250" / O.D. 1.983" for 2,000-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.25 Inch I.D.
- 1.98 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: What is Difference Between Grease Seals RG06-010 and 34823
- Q&A: Replacement Bearings And Seals For A CE Smith Multi Sport Plus Boat and Kayak Trailer CE48870
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Can A Load Range G Tire Be Installed On The Lionshead Aluminum Siberian Trailer Wheel LH78MR?
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can Multi Purpose Lithium Grease be Used in Dexter Axle
- Q&A: Looking For Hub Assembly With Bearings For Dexter 4,400 lb Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Double-Eye Trailer Suspension System Review