Draw-Tite Trailer Hitch Fit For a 2022 Ford Bronco

Question

Question:

Just want to confirm that this hitch fits my 2022 Ford Bronco

asked by: Clyde

0

Expert Reply:

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR is a confirmed fit for your 2022 Ford Bronco.

This trailer hitch has a maximum towing capacity of 4,500-lbs, a maximum tongue weight capacity of 675-lbs, and features an easy bolt-on installation.

I have also attached an installation video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

I feel the Draw-Tite Trailer Hitch Receiver #DT37GR is a better option for your 2024 Ford Bronco. This receiver has an extended tube which places the hinge pin hole 3-1/2" behind the rear bumper. This makes it easier to access and allows for…

view full answer...

Answer 2

The center of the hitch pin hole for the Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is 6" further out than the center of the hitch pin hole for the Curt Trailer Hitch Receiver #C76WR. Since the hitch pin hole determines where your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 7

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 8

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 9

Hi Mike! Do you want a completely hidden hitch or one where only the receiver is visible? The Curt #C64NR you looked at has a concealed cross tube so you will only see the receiver hanging down at the rear. The Hidden Hitch by Draw-Tite #DT76GR will…

view full answer...

Answer 10

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

view full answer...

Answer 11

Hey Justin, thanks for reaching out! I'm guessing by "SAS Package" you're referring to the Sasquatch Package. In that case yes, the Air Lift LoadLifter 5000 Air Helper Springs #AL38FF are compatible with your 2024 Ford Bronco Black…

view full answer...

Answer 12

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Draw-Tite Trailer Hitch Fit For a 2022 Ford Bronco

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching