To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Very easy to order and the information supplied on the site were correct. The installation literally took minutes. I ordered this model because the hitch ends about where the tire is. The other model has the hitch receiver ending at the bumper. I don’t want to use an extender so I went this route. Looks great and I’m just hoping I don’t smack my shins on the receiver. Thanks to etrailer for making this easy!
High quality and heavy. This hitch will last the life of the vehicle. I have two small complaints with the hitch itself. First, the section that wraps around my 2024 Bronco's bumper was about 1/8" too wide. An extra washer between the bumper and the hitch fixed that. Second, the powder coating was chipped off one corner. It's heavy, so I'm guessing it was dropped. Other complaints are with the Bronco, not the hitch. My 2024 Bronco came with the wiring harness installed at the factory, and it was hidden inside a thick metal bracket bolted to the bumper. To remove this bracket, the plastic bumper cover had to come off and the backup sensors had to be disconnected. It wasn't a huge pain, but Ford decided to hide the harness way too well.
Perfect for Bronco; reciever extends back of spare tire making it convenient and secure for bike rack (no extender needed). Simply tilt down (1UP) bike rack to completely clear spare time & tailgate.
Jt 
12/24/2023
Still happy with this setup. Transporting bikes at least once a week. Easy.
Straight forward to install in my '23 bronco. I think the bolts and nuts were 3/4". Helps to have a breaker bar to crank down on the torque wrench; 75 ftlbs is a lot! It's the right distance to stick out so my bike rack doesn't hit my spare tire. Happy with the purchase.
I bought this to hold a Kuat bike rack. It works well, and it clears the spare tire with no problems. I'm pleased with the end result, though the receiver does appear to pitch upward ever so slightly. But it's not enough to be a problem for me.
The installation was a lot more involved than the instructions suggested. Do yourself a favor, and just remove the rear bumper. It's six bolts and two wiring connectors and it pulls right off. This made installing and tightening the bolts MUCH easier, and in my case it was required because Ford factory installed some metal plate blocking the mounting holes and it could not be removed without taking the bumper off.
There was an issue with the shipping address I provided, 100% my fault, and etrailer quickly reshipped it, for no additional cost. Thank you!!
No-problem installation, 1 yr later still looks like new. Very happy with both the product and the company!
Good hitch. I didnt like that the mounting bolt holes were big enough - and the spacing of the brackets compared to the vehicle - to allow it to tilt downward after installation. Its not really noticeable for a regular trailer but causes racks that do not sit on their own wheels to sag very low at the back. And it was the downward weight of a rack that caused me to purchase this hitch in the first place.
Quality products and quick delivery.
I’ve purchased 2 different trailer hitch receivers for different vehicles and a tow bar to pull my new broncos behind the motor home. Have not installed the tow bar yet but the hitches were a perfect fit. I recommend this company very highly.
The instructions includes were simple to follow. All of the hardware is quality. The quality of the hitch and hardware provides me with confidence in this hitch.
This is heavy duty hitch that comes with all of the needed parts - hitch, bolts, washers, etc. It took about 45 minutes to install on my 2022 Bronco Outer Banks.
Sparky W.
7/21/2024
Excellent quality!,
Receiver is great! Sticks out enough so you don't need an extension to use your bike rack.
Michael
10/31/2022
Still holding up perfectly. No rusting or paint chipping anywhere.
Easy to install and works great!
Easy to install with very little effort. Maybe 20 minutes. Took longer to get my tools then to put it on.
The hitch is well made, looks good. The assembly should have been 5-10 minutes but the nuts would not spin freely by hand - had to use a wrench from the first thread (no I wasn’t cross-threading). Took me about 30 minutes due to having to turn a wrench a lot more in an uncomfortable/ confined area. Once installed though works well. This hitch is extended but I couldn’t find a dimension on the website- it’s 10” which is enough to get it roughly to the standard sized spare on a bronco. This is important for hitch mounted bike racks - and works well with my Küat rack (tho you still cannot fully open the rear door).
Excellent product. This is the 2nd hitch I've bought from them. Great products
Ordering was easy, and the receiver arrived quickly.
I was a little surprised there was no packing material within the box... just a 30 lb receiver in a larger than necessary box. I wasn't worried this behemoth was going to get damaged... my thought was, it might break the box (but thankfully, it didn't).
This is a solid product. As soon as I opened the box, I was instantly satisfied with the construction of this receiver.
I picked the Draw-Tite product for several reasons:
1. It has a higher tongue weight than the competition;
2. It has a higher tow rating than the competition;
3. It has a built-in mount for a wiring harness;
4. It extends further than the competition, so I will NOT need an extension for my hitch mount to clear my Bronco's spare tire to avoid the trailer jack; AND I will be able to partially open the tailgate, again, without a hitch mount extension.
Installation was a breeze. A box wrench; a socket/rachet; and a torque wrench, and it was installed using 4 bolts in about 10 minutes (be sure you install when the vehicle is cold, as you are working up against the muffler). It couldn't have been easier to install, and looks great!
Fairly easy to install. Took me about an hour.
Simple and easy to install. Recommend if using a carrier.
Easy install . Though the extended receiver takes some getting used to aesthetically, the convenience is great extending past the spare tire for quick hitching up. It also is a great step for tying up wader boots!
Very easy installation and the longer length makes it work with a bicycle rack without an extension for the spare tire. If you can use a wrench you can install this hitch receiver.
Heavier than I expected for the price. Very Nice!
Fits great. Easy install. Doesn't need an extension to use a bike rack like the stock hitch did.
Flexible fingers are helpful, but this is a straightforward installation of a heavy duty hitch. The fit and finish is first rate and the hitch length works great for clearing the mounted spare without needing any extenders.
Great installation instructions
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Heather A.
2/19/2025
The install looks great Rich! The spare tire clearance looks great! What are you going to carry back there? Bikes? Aw man, if I had a penny for every time one of my family members (including myself) has walked smack dab into the ball mount on my SUV, I would be rich. You want may invest in some shin guards.