Is There a 1/2" Male to 1/2" Female Adapter to Use an Empire Faucets RV Bathroom Vessel Sink Faucet

Question

Question:

The faucet comes with 1/2 inch male connected, my faucet has 1/2 inch female to male, do you sell 1/2 inch female connected that can be attached to the water lines flex hoses?

asked by: Paul K

0

Expert Reply:

You are correct that the Empire Faucets RV Bathroom Vessel Sink Faucet # EM82WR comes with a 1/2" male connector. While we do not have the adapter that you are needing, it is a product that is available and can be sourced from your local home improvement store.

expert reply by: Scott S

0

Answer 1

Hello Andy, Thank you for the picture, they are always most helpful. The black screw connectors you're at the top of the red and white water lines are quick-connect fittings, those will unscrew and screw into to the Empire Faucets RV Bathroom…

view full answer...

Answer 2

Hello Douglass, I just heard back from the manufacturer and I was able to get the dimensions of the Empire Faucets RV Bathroom Vessel Sink Faucet #EM82WR you requested. The height when the is fully raised is 8-3/4". From the center of the post…

view full answer...

Answer 3

I went out to our warehouse for you to measure the Empire Faucets RV Bathroom Vessel Sink Faucet part #EM82WR. The hole used for installation will need to be at least 1.5" diameter. The hot hose is 9" long and the cold hose is 7" long.…

view full answer...

Answer 4

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 5

Hi Dale, While we don't have the Eaton brand, that's an 1,800 watt pure sine wave inverter, and we do have a great option that will work for you, from Progressive Dynamics: - Progressive Dynamics 1800 Watt Inverter w/ Transfer Switch #PD44FR

view full answer...

Answer 6

Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…

view full answer...

Answer 7

The etrailer sticker you see on the pictures and videos of the Empire Faucets Stainless Steel RV Bathroom Vessel Sink Faucet - Single Lever Handle #EM82WR are only on that specific faucet used in the pictures and videos. That being said the sticker…

view full answer...

Answer 8

Hey Greg! We definitely have something that will work for your 2018 Forest River travel trailer. Since everything switched to the new R32 refrigerant this year following the 2025 EPA guidelines you will need a complete system. For a low-profile…

view full answer...

Answer 9

Hello Tim. The Fitting for the Empire Faucets RV Bathroom Faucet #EM95PR is indeed the standard 1/2 inch FPT. I am sorry to say that we do not carry any of these fittings here so that is something you would need to pick up at a local plumbing supply…

view full answer...

Answer 10

The Empire Faucets RV Faucet #EM82WR is designed for single hole sink applications like what you have on your Grand Design Solitude 310GK and would work great. Thankfully the single hole applications are all pretty standard so we know this would work…

view full answer...

Answer 11

Hey Cathy! The best option we've got is the Utopia RV Bathroom Faucet #UT43FR, which actually has a higher rate of flow at 2 gallons per minute. Does this color and style fit what you're looking for?

view full answer...

Is There a 1/2" Male to 1/2" Female Adapter to Use an Empire Faucets RV Bathroom Vessel Sink Faucet

Product Page this Question was Asked From

Continue Researching