Recommended No-Drill Installation Hitch for a 2004 Ford F-150

Published 12/25/2022

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(87)

$305.60

Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector

(90)

$77.00

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6648)

$167.12

Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K

(783)

$76.37

Question:

Will the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 13357 truly fit my 2004 Ford F150 without any drilling?

asked by: Gabriel C

Expert Reply:

I checked with Curt and am happy to confirm that the Curt Trailer Hitch item # 13357 does fit all of the 2004 Ford F-150's without a factory hitch installed. You will just need to lower the exhaust to access the pre-drilled holes in your trucks frame. This hitch does not require any drilling whatsoever to install. It attaches to your F-150 with included hardware.

The Curt Trailer Hitch item # 13357 is a class III hitch, with a 2" receiver, that is made in the USA. It has a 6,000 lbs towing capacity, and a 600 lbs maximum tongue weight that can be increased to 10,000 lbs and 1,000 lbs when used with a weight distribution system.

I have linked the instructions below for you to take a look at. I have also attached a couple of pictures so you can see what this hitch looks like once installed.

If you are planning on towing a trailer with brakes, you will also need a 7-way wiring harness item # 118247, a brake controller item # 90195, and a ball mount kit item # C45534.