Replacement Axle For a Boat Trailer With a Old Tapered Spindle of 1.5 Inches to 1.25 Inches
Published 12/23/2022
Question:
My boat spindle starts out at 1.25 and steps up to 1.50. The hub broke and I have no numbers to go by. Its an older trailer. It’s a standard 5 x4.5 bolt pattern. Help please
asked by: Mike
Expert Reply:
Based on your spindle tapering from a 1.5" diameter to 1.25" it sounds like a odd sized spindle which is no longer used. If you can provide me with some more information including the weight capacity and axle type on your trailer I can help you select a new axle like the Axle # e72GR. This particular axle has a hub face to hub face measurement of 89", spring center to spring center of 74" and is rated for 3,500lbs of trailer weight.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Slider Base and Ram Puck System Adapter for a Curt A20 5th Wheel Hitch Head
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Spindle For Jet Ski Trailer With 2,700 lb Capacity
- Q&A: Are Powder Coat Trailer Wheels Good for a Saltwater Boat Trailer ST205/75R14
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control