Is There Trailer Sway Control that Doesn't Require Drilling

Updated 04/22/2024 | Published 11/28/2022

Products Featured in This Question

Curt Friction Sway Control for Weight Distribution Systems

(324)

$76.84

Tuson Trailer Sway Control System - Electronic - Up to 4 Axles

(45)

$505.88

Question:

Is there any way to install this anti sway bar or a similar one without drilling into the trailer frame?

asked by: Chris H

Expert Reply:

All of the friction sway control units like the Curt # 17200 that you referenced require drilling into the trailer frame. We do have electric sway control units like the Tuson part # 335TSC-1000 which uses sensors to detect trailer sway and apply the trailer brakes just enough to stop it. This would not require drilling.

expert reply by: Jameson C

Jim H.

4/21/2024

Jameson: if no drilling is required when using the Tucson 335TSC-1000, how do you attach it to a vertical component of the trailer that is 5 - 10 feet back from the coupler?

Jameson C.

4/22/2024

@JimH Good question, so while drilling is normally how the module is attached it's not required as long as it's mounted securely. So basically you'd have to come up with a way to secure it without drilling but that will be based on the application.