Recommended 5-Lug Idler Hub for Kodiak Slip-On Disc Brake Rotors
Updated 11/07/2022 | Published 11/04/2022
Products Featured in This Question
Question:
Looking at the 5 on 4 1/2inch idler hubs. Do all the ones you carry work with the Kodiak slip on discs?
asked by: Bruce B
0
Expert Reply:
Yes, we do offer idlers hubs with a 5 on 4-1/2" pattern compatible with Kodiak Slip-On Disc Brake Rotors, the Kodiak Trailer Hub for 3,500-lb Axles part # Q-HUB84545 for galvanized or part # KH84545S for stainless steel. Please note, these do not include bearings or seals but if you need these as well we do have kits with them, the Hub Bearing Kit part # BK2-100.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Dexter Hub Replacement for Hub Marked 8-248
- Q&A: Recommended Replacement For A Tie-Down Engineering Disc Brake Hub
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommendation for Replacing Torsion Axle on Ez Loader Boat Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy