Does the EcoHitch Hitch for a 2019 - 2022 Subaru Ascent Include a Fish Wire Tool?

Question

Question:

Does this hitch kit come with the forward bolt fish wire tool to install the bolt?

asked by: Jerimiah J

1

Helpful Expert Reply:

Yes, the EcoHitch Invisi Trailer Hitch Receiver item # 306-X7381 does include the fish wire tool to complete the installation.

This hitch is confirmed to fit 2019 - 2022 Subaru Ascents.

I have linked an installation video below.

expert reply by: Jerred H

1

Answer 1

I believe you are asking about the hidden hitch for your 2021 Subaru Ascent, the EcoHitch Invisi Trailer Hitch Receiver #306-X7381, and it will not compromise the integrity of the rear impact on your vehicle whatsoever. So you can use the #306-X7381…

view full answer...

Answer 2

Since you aren't sure if you'd even use a 7-way harness when towing with your 2019 Subaru Ascent you could just install a 4-way like part #C56040 and then use a 7-way adapter like part #37185 when needed which basically just plugs into an…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #76253 that you referenced is made overseas. For a similar trailer hitch with the same hidden design we do have the Eco-Hitch #306-X7381, which is confirmed to fit your 2019 Subaru Ascent and is made…

view full answer...

Answer 4

For your 2021 Subaru Ascent there are four trailer hitch receivers that will be all be hidden behind the center bumper cover, the EcoHitch #306-X7381, the Curt #C25VR, the Draw-Tite #76253, and the etrailer #e55ZR. These hitches are all pretty…

view full answer...

Answer 5

Hi Daryl! Getting the correct brake controller will depend on if your 2020 Subaru Ascent has the factory towing package or not. If you are unsure, you will want to contact a local Subaru dealer with your VIN and they can tell you. If you do have that…

view full answer...

Answer 6

To install a 7-Way harness on your 2023 Subaru Ascent, without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector…

view full answer...

Answer 7

Hey Gregory, thanks for reaching out! I really like the etrailer Trailer Hitch Receiver #e55ZR as well - I know you'll be happy with it! When it comes to wiring, a 4-Way is used for basic trailer lighting, but since you'll be towing a trailer…

view full answer...

Answer 8

The difference between the Curt #C25VR and etrailer #e55ZR trailer hitches for your 2022 Subaru Ascent is that the etrailer hitch has a matte black finish that is a bit more robust than the Curt. The matte black finish does a better job at matching…

view full answer...

Answer 9

Thank you for the purchase of the EcoHitch Invisi Trailer Hitch Receiver #306-X7381 for your 2023 Subaru Ascent, and what has happened is the hitch has bent a bit, or "flexed" during shipping. This is an all too common issue, though it is…

view full answer...

Answer 10

Yes Ben, that is correct.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does the EcoHitch Hitch for a 2019 - 2022 Subaru Ascent Include a Fish Wire Tool?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching