bing tracking image
Customer Service My Orders
Q & A Icon

Correct Braking Assemblies for Haynes Axle with 6 Bolts  

Updated 03/11/2020 | Published 03/09/2020

Question:

Could I possibly get the spacing measurement between the bolts, just a center to center measurement would help me figure out if its what I need. It's an older Hayes axle, my flanges have 6 bolts and I'm hoping that the bolt spacing is the same so I can just use 5 bolts

0

Expert Reply:

The larger Haynes Axles did in fact have a 6 bolt brake mounting flange but the braking assemblies actually only uses five bolts to attach. Therefore, the Hayes/AL-KO Hydraulic Brake Assembly part # K23-524-00 is very what you need. That said, you would need to order a quantity of two in order to cover both sides of the axle as the above part is one for one assembly. If you want to buy both you can simply order two of the above or go with the Hayes/AL-KO Hydraulic Brake Kit part # K23-524-00-2.

I have attached a photo below with some measurements.

expert reply by:
0
Conner L
click to enlarge
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>