Replacement Bushings For A CRE3000
Updated 10/04/2022 | Published 10/02/2022
Question:
If they never failed bushings were so great why were they discontinued? They are still available on eBay, but if they were discontinued, are they worth purchasing? I have the bronze bushings that came with my CRE 3000, I see at least one of them is cracked already after about 400 miles of use
asked by: Rick
Helpful Expert Reply:
The Never Fail Bushings were discontinued because they didn't sell as good as they thought they were, they were also having problems with the product. The bronze bushings wear out and start to crack from friction, age, heat, and from exposure from road salt and lubricants, it can also crack from the stress of frequent movement and weight loads. These bushings required wet bolts that will need to be greased to help prevent the cracking.
To replace you bushing The Bronze Bushings # K71-291-00 is the correct replacement bushing kit for your CRE3000. These bushings have a 9/16 inch inner diameter and an 11/16 inch outer diameter and are 1-3/4 inches long.
I attached an installation video link below.
Product Page this Question was Asked From
Dexter Bronze Bushings - Qty 4
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Snowmobile Trailer
- 9/16 Inch ID x 11/16 Inch OD
- 1-3/4 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: 66n4ab72gm
- Video: Review of Lippert Trailer Suspension Parts - Suspension Wet Bolts - LC36RP
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-5/16" - Qty 4
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-13/16" - Qty 4
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Search Results: brass bushings
- Q&A: Replacing Both 3” RV Black Water and Gray Water Valves Each With 72” Cables
- Q&A: Replacement Waste Valves Sized 1-1/2" and 3" With 72" Cables
- Video: Review of LaSalle Bristol RV Sewer - Waste Valves - 34466N4AB72GMA
- Video: A Closer Look at the LaSalle Bristol Cable-Actuated RV Waste Valve
- Search Results: electric trailer brake assembly
- Search Results: moryde cre3000
- Search Results: suspension
- Search Results: bronze bushings
- Video: Review of Dicor RV Roof Repair - Roof Gard RV Roof Protectant Refill - DC92XR
- Shop: Dicor Roof-Gard RV Roof Protectant Refill - 1 Gallon
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Suspension & Correct Track
- Video: Let’s Check Out the Replacement Wet Shoulder Bolt
- Q&A: What Information is Needed to Upgrade 5th Wheel Equalizers, Shackles, Wet Bolts, and Add X-Factor
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs: The Breakdown
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Q&A: Do I Need to Add Washers to the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles?
- Q&A: Replacement Bushing Kit for CRE3000 MORryde Rubber Equalizers
- Q&A: Replacement Leaf Springs, Bronze Bushings, and U-Bolts for 3,500 lb Dexter Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
on Trailer Suspension Parts
