Is The #84 E-Z Lube Spindle # TRU87FR
Updated 09/14/2022 | Published 09/12/2022
Question:
On your replacement 4 in spindle, are the spindles already beveled? Or does the axle need to be bent for proper tire camber?
asked by: Vince
Expert Reply:
Per the manufacturer The #84 E-Z Lube Spindle w/ Brake Flange # TRU87FR is not beveled. They only machine the front part of the spindle, which is straight. The spindle is not left or right orientated. The part that attaches to the axle/beam is not machined.
The spindle has a sturdy steel construction and has a weld-on installation. The spindle has a weight capacity up to 1,750 pounds. The Inner Bearing # L68149 and Outer Bearing # L44649 are the correct bearings.
I attached a review video link below.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 2-3/8 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How Much Solar Power Do I Need For My RV?
- Q&A: What Type of Grease Comes in CE Smith Trailer Hubs
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Q&A: Can the Spring Seats Be Moved on the Dexter 3,500 LB Drop Axle
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: How to Confirm Fit of #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Will TruRyde Trailer Hub and Drum Assembly Fit 2019 Travel Trailer With 3,500 lb Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How To Measure And Replace Everything In Your Hub Assembly