Recommended 2-5/16" A-Frame Coupler w/ Ez-Latch and 9-7/16" Width
Updated 09/08/2022 | Published 09/06/2022
Question:
I am looking for an Ez-latch trailer coupler for my boat trailer. It is a prestige brand built in 1999. It holds a 16 and a half foot boat. The measurements of the current A-frame coupler is approximately 11 and 1/2 in on each side and 9 and 3/4 in facing the back of the trailer. Please advise me on what the correct part would be. Thank you.
asked by: James R
Expert Reply:
The Ez-latch a-frame coupler we have that will accommodate your trailer's tongue is a little longer than your measurements. It is the Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole item # DM15633-81. This has the requested Ez-latch and fits a 2-5/16" ball.
Product Page this Question was Asked From
Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K
- A-Frame Trailer Coupler
- Standard Coupler
- 32-Degree Frame
- Weld-On
- 21000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Auto Latch
- 2-1/4 Inch Hole
- Standard Grade
- Demco
more information >
Continue Researching
- Q&A: Replacement Coupler for a 2004 Airstream Classic Trailer
- Q&A: Can I Get MORryde Suspension Upgrade Kit MR86ZR With Two Extra Sets Of Shackle Straps?
- Q&A: Transition Plates For Trailer Ramp Door That Is 80-1/2" Wide
- Q&A: How Thick is the Replacement Bearing for etrailer and Ram Square Jacks # TJD-7000-BR
- Q&A: Can I Plug the etrailer Electric Trailer to the OEM 7-Way On a 2016 GMC Sierra 2500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Parts or Coupler for UFP CA-50 A-Frame Trailer Coupler
- Q&A: Which Is Better a Cast Steel or Stamped Steel Coupler
- Article: How to Choose the Right Trailer Hitch Class
- Article: VCC Pickup and Dropoff
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer