Adding a Trailer Wiring Harness to a 2000 Harley Davidson

Updated 11/15/2013 | Published 11/13/2013

Products Featured in This Question

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(152)

$168.28

Question:

Do you have an isolation module combined with a 5wire to 4 wire converter? Would be nice if it was plug and play on a 2000 Harley Davidson.

asked by: Steve D

Expert Reply:

We do have some wiring harnesses that you can use on your 2000 Harley Davidson but they are not T-connectors, they are all hardwire. A harness like # C59496 would work for you. The green wire taps into the right turn signal, yellow for left turn signal, red for brake lights, and brown for running lights.

This unit will also need to be connected to the bike battery and what this does is actually power the trailer lights to help isolate the bike wiring from the trailer wiring for additional circuit protection. The harness comes with the extra wire needed, fuse and fuse holder, quick splice connectors, and a circuit tester to find the correct wires on the bike to tap into.

expert reply by: Michael H