Can Batteries Be Replaced on HappiJac Remote Without Screws on the Back

Question

Question:

My controller does not have the screws on the back will it still have 2 AA battery’s ? My right front and back will go up and down but my left both will not go up or down? Help thanks

asked by: Jim

0

Expert Reply:

It sounds like you may have the older system based on the description of your remote. The # LC723915 is a wireless remote with replaceable batteries. The older remote is sealed and instead of batteries you have to charge it with the included cable.

You can tell which one you have based on the buttons. The old remote has 10 buttons and the new remote has 12 buttons. You can also tell if you have the older system by looking at your circuit board which has 2 models. One has a wiring diagram on the cover, the other one has a smiley face and says HappiJac Wireless. Both of these indicate you have the old system.

If your old remote is failing and you wish to replace it you will also have to replace the circuit board with the newer model # LC733513. They also come together # LC733540. The # LC149557 will be needed to sync them. This is the only option since the old remote is no longer available according to Lippert. The new remote and board will be compatible with your motor heads.

It doesn't sound like a battery issue since the right side still works. It could be the remote is bad, the circuit board is bad, or a wiring issue. I would double check the wiring connections and make sure nothing is damaged before deciding to replace parts. It could also be the motor heads but it is unlikely that two failed at the same time.

expert reply by: Robin H

0

Answer 1

Thanks for reaching out, Scott! Yes, you'll need the Replacement Circuit Board w/ Wireless Remote #LC733540 to get a working remote for your HappiJac system. Please note that you'll also need the Remote Cable #LC149557 (or a phone cord…

view full answer...

Answer 2

Yes, the Replacement Remote Cable for HappiJac Electric Truck Camper Jack Systems #LC149557 will work with your older remote system. If you just need the remote and the circuit board, then I recommend purchasing them together #LC733540, rather than…

view full answer...

Answer 3

Well that stinks to hear; I'm sorry someone was lousy enough to steal from you. And while we do have an option for you, the older wired remote is not available as a replacement part. So what you would need to do instead is replace the circuit…

view full answer...

Answer 4

The Replacement Remote Cable for HappiJac Electric Truck Camper Jack Systems #LC149557 is just the way for your remote #LC723915 to connect to the controller for initial setup or if you had an older non-wireless model. It won't control anything…

view full answer...

Answer 5

I was able to confirm with my contact at Lippert that you can use the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper Jack Systems #LC733540 to replace the circuit/control board on your corded HappiJac system. You can…

view full answer...

Answer 6

No, you won't need a new remote, however for a replacement circuit board you're going to want the Replacement Circuit Board for HappiJac Electric Truck Camper Jack Systems #LC733513 which is going to be a direct replacement.

view full answer...

Answer 7

For your Happijack model 4150, I confirmed with Lippert (the makers of Happijack) that the Replacement Circuit Board for HappiJac Electric Truck Camper Jack Systems #LC733513 is a direct replacement for your current control board you have installed.

view full answer...

Answer 8

The Replacement Remote Control for HappiJac #LC723915 is the replacement remote compatible with the Replacement Circuit Board for HappiJac #LC733513. HappiJac has two remotes, one is compatible with the older circuit boards that have a 20 amp fuse.…

view full answer...

Answer 9

Different species and grades of wood have different characteristics for durability and strength. Unless you have a trusted local lumber yard you can rely on for guidance I recommend using the TorkLift Camper Packer Camper Stand Kit with Lumber…

view full answer...

Answer 10

The bolts you show will work with the TorkLift GlowStep Camper Scissor Steps - 2 Steps - Aluminum - 20" Wide - 375 lbs #TLA7802. The attachment bracket will work for this application. If you want to replace the pins with locks, you can use Pin…

view full answer...

Answer 11

I checked with my contact at Lippert and he tells me that the #LC149557 is different from a standard phone cord since it is designed to work with logic boards that are specific to HappiJac components.

view full answer...

Answer 12

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Can Batteries Be Replaced on HappiJac Remote Without Screws on the Back

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching