Recommended Timbren Axle Less Kit For Travel Trailer
Updated 07/14/2022 | Published 07/12/2022
Products Featured in This Question
Question:
Need a torsion axle for I beam trailer, 80 wide trailer, standard flange width. 3500 lb 5 lug. Ok with more than 3500 lb but must be 5 lug. Do you carry that? Cannot find on the website.
asked by: Chris D
Expert Reply:
Though we do not carry torsion axles on our site I do recommend switching to The Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 pounds # TASR35HDS04.
This system will replace your current axle and suspension system and is a good alternative because we don't carry torsion axles and the right size is not available. The Timbren system fits any frame width and can be bolted on or welded on for installation. The Timbren system has an easier installation and will provide more ground clearance then the torsion axles would.
I attached a review video link below.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Does the etrailer Trailer Axle Beam with Easy Grease Spindles # e83GR Have Brake Flanges?
- Q&A: Recommended 3500 LBS 95" Axle and Replacement Spring Seats for a 78" Spring Center
- Q&A: Comparing etrailer And Dexter 3,500lb 4 Drop Axles
- Q&A: 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
- Q&A: Diameter of Trailer Axle Beam with Easy Grease Spindles e83GR
- Video: Measuring To Choose The Right Trailer Axle
- Video: All About the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Video: Review of the Bottom Rail Trim for Enclosed Trailer
- Video: Hands-On with the LED Trailer Fender Clearance Light
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: Feature Breakdown: TruRyde Electric Trailer Brakes
- Video: The Low-Down on the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles
- Search Results: 3500 lbs axle trailer brakes
- Search Results: axle mount
- Search Results: 3500 lbs axle
- Search Results: trailer spring bushings
- Search Results: trailer panel
- Search Results: trailer leaf springs
- Search Results: springs
- Shop: Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate - Sidewind - Side Mount - 1.8K
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 1.6K
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Q&A: Do Hubs/Drums Need to be Replaced When Changing Braking Assemblies