Solution for Replacement Fender for 2018 Forest River R-POD 190  

We do offer many styles of replacement trailer fenders in plastic, steel and aluminum that you can check out on the page I linked for you. To start, click on your wheel diameter. I reviewed many photos of the 2011 RP-177 and it appears that the steel…

While we don't currently carry any black fenders that would match your 2018 Forest Rover R-Pod RP-179 fenders we do offer the CE Smith Single Axle Trailer Fender #CE17900G which can be painted black and mounted onto your trailer.

When replacing the fenders on your 2016 R-Pod 178 you want to choose a replacement that is as close as possible to your existing fenders. Although slightly shorter, the Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to…

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

The Parallax 7345 has a 45 amp converter in it so the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp #PD4045KA you were looking at would be a perfect replacement for it. They'll just need to flip the small…

I don't see why you couldn't use the LED Combination Trailer Tail Light #STL2RB upside to replace your driver side light. The only thing that might be weird is how the light will mount to the trailer physically since you're using the…

That looks a lot like our part #MCL180ARB. Check out the dimensions in the diagram and compare them to yours. If they don't match let me know what they are but I think this is the correct light.

Thanks for the picture. I found a great replacement tail light combo for you. I recommend the Optronics LED Combination Trailer Tail Light - Submersible - 7 Function - 18 Diodes - Square - Passenger Side item #STL2RB. And driver's side item…

Over or under 80 means 80 inches of width. There are certain lighting requirements if the trailer is more than 80 inches wide. Trailers that are less than 80 inches wide can still use lights that are indicated as over 80 inch. Since you need a 5-way…

You do not have to connect the ground wire of the LED Trailer Fender Clearance Light #MCL180ARB to your main ground that goes to the wiring box. What you can do is use a ring terminal such as #44-5310A and screw like #101131802 and ground it to your…

You can change the lens around on the LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side item #MCL180ARB. This light can be mounted on both sides but does not come in a different orientation because you…

You absolutely can mix LED and Incandescent lights on your trailer. For your PM444 replacements, I recommend the Optronics Over 80" Wide, Square LED Trailer Tail Light, 7-Function, 18 Diode, Right Hand #STL2RB and Left Hand #STL3RB. The LED…