Truck Camper Tie-Down Fit For 2019 Ford F-450

Question

Question:

Looking for a setup for a 2019 F450 to accommodate a truck camper

asked by: James F

0

Expert Reply:

We can get your 2019 Ford F-450 set up with camper tie-downs for a truck camper, and what you will need is the following, so long as you A) have the factory trailer hitch and B) do NOT have factory flip-out steps that are mounted under the truck bed.

There are two options, and while both use steel brackets, one has steel tie-down inserts while the other has aluminum tie-down inserts. I do recommend the aluminum due to them being completely rustproof, though they are the more premium option so I did want to give you the choice. Here are both fits for your '19 Ford F-450:

- Aluminum: TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Front # TLF2021A & Rear # TLF3008A

- Steel: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2021 & Rear # TLF3008

The only other thing you will need are turnbuckles, and for that the best option by far are the TorkLift Locking FastGun Turnbuckles. These turnbuckles are the easiest to use due to their lever-action handles, and are also are locking to help protect your investment. They come in a quantity of four and you can choose from different colors:

- TorkLift Locking FastGun Turnbuckles - Gray # TLS9522-2-LK, Polished Stainless Steel # TLS9526-2-LK, or Black # TLS9529-2-LK

expert reply by: Kyle S

0

Answer 1

I spoke with my contact at TorkLift regarding the Custom Frame-Mounted Camper Tie-Downs for your 2018 Ford F-450. He stated that while they have not been able to physically test the fit on your 2018 model F-450, it is very likely that the #TLF2021…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Darrell, great question! The Timbren Suspension Enhancement System #TFRSDJ is what you want for your setup. This is designed for your typical towing and hauling. The #TFRTT350J is the severe service kit. The springs may have a lighter capacity,…

view full answer...

Answer 8

Hey Gene, welcome back! The correct tie-downs are the TorkLift Talon item #TL45SV, you were looking at. This a set of front and rear tie-downs. The rear ones will attach directly to your 2025 Ford F-450's TorkLift SuperHitch Magnum hitch item…

view full answer...

Answer 9

Hey Mark, welcome to the fifth wheel community! I'd be more than happy to help you. So a fifth wheel hitch will sit lower than the top of the truck bed rails so you wouldn't have to remove the head of the hitch to close the cover BUT the…

view full answer...

Answer 10

If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System #LC736514-ELKIT then you'll need part #LC182492. The flat bracket can be swapped out with part #LC182494 and the swing brackets can be replaced with…

view full answer...

Answer 11

Yes, you can Jeff! You can still use your F-350's hitch to pull a trailer with the TorkLift Tie Downs item #TL87DR installed. You will most likely need an extension though to clear your in bed camper if you plan on towing a trailer with it in…

view full answer...

Answer 12

Hi Mark! For your 2020 Ford F250 with the 6-3/4 bed, running boards, and factory hitch, you are going to want the following two options: TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TL77CR TorkLift Camper Tie-Downs - Custom Frame Mount -…

view full answer...