Can You Drill Into An Aluminum Trailer To Install The CargoSmart D-Rings

Updated 07/06/2022 | Published 07/05/2022

Question:

Have a aluminumtrailer.com 18 car hauler. Need additional D ring anchors. Is it safe to drill through the frame to install Item # 3486509?

asked by: David O

Expert Reply:

When it comes to installing The CargoSmart Anti-Rattle D-Ring Tie-Down Anchor - Bolt On - 1/2 inch x 3-1/4 inch - 3,666 pounds # 3486509 into your aluminum trailer you can.

Aluminum is a soft metal and therefore a standard HSS drill bit will be able to drill into it. However because of the low melting point of aluminum a better choice would be to use a cobalt drill bit. The cobalt drill bit will dissipate heat quicker and ultimately assist in reducing heat build up.

The CargoSmart D-Rings have a maximum load (break strength) of 11,000 pounds, and has a safe working load limit (WLL) of 3,666 pounds. The D-Rings rotate 180 degrees so you can attach your rope, strap or bungee from multiple angles.

I attached a review video link below.

expert reply by: Noah E