Tie Downs for a 4-seat Polaris RZR

Question

Question:

Will part No. EM59110 be strong enough to tie down a 4 seat Polaris Razer on a Primo aluminium utility trailer? Thanks Dave

asked by: Dave B

0

Expert Reply:

Hey Dave, thanks for reaching out!

The Erickson Round D-Ring Tie-Down Anchor # EM59110 has a capacity of 1,200 lbs and is not going to be strong enough to cinch down your Polaris RZR securely. You need the CargoSmart Anti-Rattle D-Ring Tie-Down Anchor # 3486509. Install is easy and I've attached a video of one of our installers demonstrating how to do it!

If you need straps, check out the Caliber TrailBlazer ATV/UTV Tie-Down Kit # CA84AJ. They come with a carrying bag to store when you're not using them!

Where are you going to take your RZR?

expert reply by: Josh B

0

Dave B.

1/13/2026

Thank you for this information Josh. Appreciated. Dave

Josh B.

1/13/2026

@DaveB no problem at all! I grew up riding ATVs all the time so I know how fun taking them out on the trails can be and how important it is to make sure they stay snug in transit. Are you taking yours out on any fun trips soon?

Answer 1

Hey Lina, we have the Caliber Trailblazer ATV/UTV tie down kit part #CA84AJ that can fit tire diameters that are between 25 and 35 inches. What UTV do you have? In a comment below a customer of ours was able to use the part #EM98CV as well although…

view full answer...

Answer 2

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

view full answer...

Answer 3

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

view full answer...

Answer 4

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…

view full answer...

Answer 5

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

view full answer...

Answer 6

The Curt Class III Round Tube Receiver Hitch #13077 that you referenced is actually the only hitch available that is confirmed to fit your 2017 BMW X5 that has the M-Sport Package. The Draw-Tite hitch that you also mentioned is indeed designed for…

view full answer...

Answer 7

If your rod is 1-1/4" diameter, then it sounds like you have a 12K Bulldog Trailer Jack for which the Replacement Screw and Nut Kit part #BD500217 at 17" long x 1-1/4" diameter most closely resembles the Replacement Rod and Nut Kit…

view full answer...

Answer 8

I would be happy to! Both the 21K Demco Autoslide 5th Wheel Hitch w/ Slider item #DM29GV and the 18K item #DM79GV fit the 2024 Chevy Silverado 2500 with the factory puck system. They both come with attached side plates that mount directly to the in…

view full answer...

Answer 9

Yes, there are anti-rattle devices that can be used with the Equal-i-zer Weight Distribution System to prevent the shank from sliding back and forth and damaging the hitch pin hole. The Equal-i-zer System has a solid shank which means the only type…

view full answer...

Answer 10

Somehow you have a short between the reverse light circuit of your trailer wiring and the 12 volt accessory circuit. The center pin is the reverse light circuit and the 1:00 pin of the connector on the truck is the 12 volt circuit. So what you need…

view full answer...

Answer 11

Some trucks do need an under-the-hood connection of wiring to activate the 12V trailer power feed and the trailer brake controller power input feed. This process is outlined and illustrated in the linked article, in the section titled…

view full answer...