Troubleshooting Installation of Curt Wiring Harness on 2013 Honda Accord Seda Without LED Taillights

Updated 06/07/2022 | Published 06/04/2022

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(35)

$56.56

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(549)

$42.90

Question:

I have two different tail light adaptors to connect into trailer kit wirinf harmess one fits but the other doesnt not sure if i can get an adaptor or what

asked by: Dawson

Expert Reply:

Since it looks like you have the 2013 Honda Accord Sedan without LED taillights the first thing you should do is make sure you have the correct wiring harness. If that is correct, then you will need the # C56011 instead of the # C56173.

When installing the wiring harness on that side you will use the yellow T-connector for the top plug and the red one for the bottom plug. Assuming you have the correct wiring harness the two plugs from your picture should have no problem fitting.

I have attached an installation video for your reference. If you watch starting at the 3 minute mark you will see where both connectors that match your picture plug into the Curt wiring harness.

expert reply by: Robin H