What is Difference Between Demco Couplers # DM13203-95 # DM13203-52

Question

Question:

what is diffence of Demco #DM13203-95 #DM13203-52 specs?

asked by: Manfred S

1

Helpful Expert Reply:

The difference is the finish of the two couplers. The Demco coupler part # DM13203-95 is a galvanized metal finish which is basically a zinc coating and the # DM13203-52 on the other hand is a silver powdercoat finish which is basically like a really durable paint.

expert reply by: Jameson C

1

Answer 1

Buyers Products Straight Tongue Trailer Coupler #3370091562 should be installed with bolts through all three holes in the channel mount so that it can meet its published weight specs. Two of the holes are spaced at 3-inches on center; the third is…

view full answer...

Answer 2

I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler #DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from…

view full answer...

Answer 3

Similar to the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067, what you'll need for your RAM with an OEM brake controller is the: -Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV…

view full answer...

Answer 4

It sounds like you need the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM for the OEM brake controller on your 2022 Ram 3500. This will ensure that your controller works properly with the Hydrastar Electric Over Hydraulic…

view full answer...

Answer 5

Assuming you have the factory brake controller on your 2020 Ram 3500 it is likely that you will need the #HBA-CAM for your HydraStar Electric Over Hydraulic Actuator #HBA16 to function properly. I reached out to Hydrastar and they are not 100% sure,…

view full answer...

Answer 6

Hi Ian! Disc brakes will need to have at least 1,600 psi from the actuator (drums are 1,000 to 1,200), so you will want to make sure whatever you go with is rated for that. With that said, I recommend the Hydrastar Marine Electric Over Hydraulic…

view full answer...

Answer 7

Hey John, I am confident we have just what you need but I would need to know more info to pick out what you need. First thing I need is the axle capacity of your trailer and how many axles. Is this a saltwater boat trailer? Does the trailer have…

view full answer...

Answer 8

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

view full answer...

Answer 9

The Kodiak Dacromet Disc Brake Conversion Kit, item #K2HR35D, would be a good choice for conversion to disc brakes on your boat trailer. We have not had the opportunity to do a video installation for the disc brake conversion yet, but I will go…

view full answer...

Answer 10

Hello James, thanks for reaching out. Yes, there is an option for the 18K BTU Chill Cube unit that comes with a thermostat that controls both the furnace and the AC. What you will need is the following: - Furrion Chill Cube RV AC w Air Distribution…

view full answer...

Answer 11

The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a little…

view full answer...

Answer 12

Hey Dennis, you can definitely replace your current AC units with Chill Cubes but you should note that all of the Chill Cubes are rated at 18k btu. So if you have a roof ducts you'd want the part #FR49TD or if there aren't any ducts you'd…

view full answer...

What is Difference Between Demco Couplers # DM13203-95 # DM13203-52

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching