Replacement Bearing Kit and 5 on 4-1/2 Inch Bolt Pattern Idler Hub for 1-1/16 Inch Diameter Spindle
Updated 05/24/2022 | Published 05/22/2022
Products Featured in This Question
Question:
Hello ....I just acquired a trailer that is built with a p 15 ......found this number as well snd4263410.....its a 4 lug axle. I want to buy 5x 4.5 lug hubs for this axle. Could you tell me if the spindles are 1 1/16 ....thank you for your time
asked by: Ron R
Expert Reply:
Thank you for the information. I was able to confirm with my contact at Dexter Axle that your spindle does have the 1-1/16" diameter so you would need the equivalent of 2 of the 031-031-02 bearings and 1 of the 010-060-00 seals for each hub.
This means the replacement bearing kit # BK1-150 is what you'd need for your axle so for a replacement hub you need the Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 Bolt Pattern # AKIHUB-545-2-LFEZ-2K.
Attached is an installation video for you to check out.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: griots garage
- Search Results: d washer
- Search Results: tools
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: D Washer for EZ Lube Spindles
- Shop: Griot's Garage 4-Finger Microfiber Cleaning Mittens for Vehicles and RVs - Qty 2
- Q&A: Can E-Z Lube Hub Be Used on Non-E-Z Lube 2K Standard Axle with BTR Spindle
- Q&A: Length of Hub For 2k Axles
- Q&A: Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- Q&A: Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: Does Trailer Axle # T20BTR-6048 Fit AKIHUB-545-2-LF-2K Hubs
- Q&A: etrailer Idler Hub Assembly to Fit 2K Dexter Trailer Axle Beam with Standard BTR Spindles