Replacement Hardware for Trailer Hitch on 2007 Toyota Highlander

Question

Question:

Looking for hardware to mount a hitch to a 2007 Toyota Highlander. What size are the bolts? Thanks for your help!

asked by: Noah

0

Expert Reply:

You'll need (6) M10 - 1.25 x 30 Class 10.9 hex bolts and (6) 3/8 inch conical toothed washers.

We offer them in the # RHK kit you'd looked at, On the product page, you'll input the hitch part number and choose the hitch manufacturer from the provided drop-down menu.

If you wish, you should be able to find the bolts locally, but the conical tooth washers are a specialty item that you'll probably not find at your local home center. We offer them as part # 01292006-020-01.

expert reply by: Mike L

0

Answer 1

The washers that are included with trailer hitch #24819, are conical tooth washers similar to #01292006-020-01. You are correct, they are sort of bowl shaped. The tooth end goes towards the hitch. I have included a link to the installation…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 8

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 9

Hello Shuntaro; it sounds like the weld nuts in the vehicle frame likely have some dirt, rust, or undercoating buildup in them, which is pretty common. We recommend cleaning the threads with a wire brush and using a thread chaser if needed before…

view full answer...

Answer 10

The bolts included with the Draw-Tite Class III #75471 Hitch are Class 10.9. They're 10mm in diameter, 30mm long and have a 1.25 thread pitch. If you're needing replacement installation hardware, we can supply a replacement hardware kit for…

view full answer...

Answer 11

Hi Armani! The TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2" #TS96VR for your 2022 Hyundai Tucson is manufactured right here in America. It also has a limited lifetime warranty and can handle up to 4,500 pounds and 675 pounds of…

view full answer...

Answer 12

Hey Tim, thanks for reaching out! The .75" sag you're seeing is acceptable, that will not have much of an effect on drive quality at all. If you'd like to totally level out your ride, then add the Air Lift LoadLifter 5000 Ultimate Air…

view full answer...

Replacement Hardware for Trailer Hitch on 2007 Toyota Highlander

Product Page this Question was Asked From

Continue Researching