Replacement 4 Flat Connector For A DK2 Trailer

Updated 05/09/2022 | Published 05/08/2022

Products Featured in This Question

Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

(9)

$2023.38

25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground

(297)

$29.48

Question:

HI - I have a DK2 trailer - the 5x7. The wiring that starts at the tongue and goes back to where it splits by the axel is bad. I removed it, it appears to have flat 4 connectors at both ends and be about 12 long. Do you have a replacement part

asked by: Brad O

Expert Reply:

When it comes to replacing the 4 flat connector on The Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2 foot Long - 1,640 pounds # K2MMT5X7 The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB will be a good replacement.

The Wesbar harness will have to be spliced with the existing wiring on the DK2 trailer after you cut the bad 4 flat connector off of the trailer. The wiring configuration is as follows:

White - Ground Wire
Yellow - Left Turn/Brake Light
Green - Right Turn/Brake Light
Brown - Tail Lights

I attached a review video link below.