Correct Size Bolts for Installing Reese Dual Cam Brackets to Trailer Frame

Question

Question:

How can I get the bolts 4 that go to a duel cam nut rivet Reese

asked by: Jack D

0

Expert Reply:

The bolts that secure to the Rivet Nuts for Reese Dual Cam High Performance Weight Distribution # RP58507 aren't available from Reese as a replacement part but you should be able to find them fairly easily at your local hardware or home improvement store. You just need 4 of the 1/2"-13 X 1-1/2” Grade 5 Bolt and you'll be set.

expert reply by: Jon G

0

Answer 1

I spoke to the manufacturer of your Equal-i-zer Weight Distribution System #EQ37100ET. They said if you do not have the Spacer Rivet #EQ95-01-9450 that you would be able to use a bolt as a temporary replacement. You will want to be sure to check the…

view full answer...

Answer 2

I would definitely recommend Equal-i-zer for a weight distribution hitch. Unlike other companies with tons of products, Equal-i-zer only focuses on weight distribution and is considered to be the best overall system. Choosing the right hitch will…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Correct Size Bolts for Installing Reese Dual Cam Brackets to Trailer Frame

Continue Researching