Can I Use One Erickson ATV E-Track Tie Down Kit # EM09160 for Different Wheel Sizes?  

The installation method you mention for the #EM09160 Erickson ATV E-Track Tie-Down Kit should be sufficient to hold down your 800 lb ATV, but I'd personally feel better if you could tie in to a metal crossmember under the trailer decking or use a…

In order to attach the deck boards to your open trailer, I recommend using 1/2" carriage bolts. These carriage bolts can be either zinc plated or made of stainless steel. They will need to run though both the deck board and trailer frame. In…

The 2-1/2" Long Torx Trailer Floor and Wall Liner Screw #TFX250ACQ could be used to secure e track wheel chock like the part #EM09160 but it would not be your most ideal solution since this is designed to secure wood to metal. You are wanting to…

If you can bolt the chocks of the Erickson ATV E-Track Tie-Down Kit #EM09160 to some main support beams under the floor of your aluminum trailer then you would not have to use a backing plate. But if you need to attach them to the floor where there…

I think ideally you'd use two kits of the Erickson ATV E-Track Tie-Down Kit #EM09160 to secure them properly. I'd say on normal roads this is a great idea (using two kits), but on a rough road it's basically a requirement so that you…

It is ultimately up to you where you want to install the Erickson ATV E-Track Tie-Down Kit #EM09160. But I like your idea because it secures the front and the back as well as left to right so I say go for it!

The Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs #EM09160 does not have a specified rating by the manufacturer. I recommend using 5/16 inch grade 5 bolts that are 1 inch longer than whatever your floor thickness is…

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…

It looks like each chock and strap from 2 of #EM09160 will need to be able to hold around 375 pounds to handle the weight of the 2014 Arctic Cat Wildcat X Limited and that is just static load and does not include the forces applied to the chocks and…

I contacted Erikson and they told me the straps of the ATV E-Track Tie-Down Kit #EM09160 should not be used diagonally, and that it is illegal to do so. You might contact your local DOT to check this for your specific area. Erikson also verified that…

Erickson offers only one size of E-Track wheel chock which measures 8-1/2 long x 6-3/8 wide x 4-1/2 tall. This is offered as a single chock under part #EM09162 and as a pair under part #EM09162-2. Erickson does offer a wheel chock and tie-down kit…

We have not had anyone report back to us that the strap of the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 came off of the tire. When installed properly there basically wouldn't be any movement forward to back on…