How To Measure For Replacement Rear Hanger for 2019 Jayco Pinnacle Fifth Wheel
Published 04/13/2022
Products Featured in This Question
Question:
We have a LCI hanger on our left rear hanger. The weld came apart. Which part number will fit?
asked by: Chris D
Expert Reply:
We have several options and I think we can locate what you need with a little more information provided. Unfortunately we not have the abilty to pull OEM build sheets to identify what part numbers were used to build a Jayco Pinnacle. But we have options such as the Rear Hanger for 2" Wide Slipper Springs, # 30-28 that is 5-1/4" Tall with a 5/16" bolt hole and if you let me know the needed measurements and what size springs you have we can locate a solution. Please note the attached image.
(click to enlarge)
Product Page this Question was Asked From
Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 2 Inch
- 9/16 Inch Diameter
- 5-1/16 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Continue Researching
- Q&A: Do I Need Longer Shackle Straps to Install the MORryde ALLTREK 4000?
- Q&A: Replacement Brake Assemblies for AL-KO T-44 Axles
- Q&A: How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
- Q&A: How To Choose Correct MORryde Shackle Upgrade Kit
- Q&A: How to Determine Correct Equalizer Upgrade For Triple Axle Toy Hauler
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: 1/2 X 13 Threads Per Inch Vintage Trailer Wheel Bolts
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Maintenance Schedule
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings