Will Timbren Rear Suspension Always Contact Axle on 2021 Ford F-350 Cab & Chassis

Question

Question:

In researching suspension enhancements for my truck, looks like these aftermarket units will help reduce the sag in rear of truck. With a partial load of tools I have 6.5 inches from frame to axle currently what is the total height of these stops? I assume truck will always be riding on them, if so what life expectancy would there be? Thank you

asked by: Otis B

0

Expert Reply:

So the overall height is 7-1/4 inches for the Timbrens that fit your 2021 Ford F-350 cab and chassis, which are the Timbren Rear Suspension Enhancement System # TFR350TTCC.

They will indeed always be touching your axle, and that's actually what they are designed to do in order to help level and stabilize your truck.

As for the life expectancy, you can expect the Timbren Rear Suspension Enhancement System # TFR350TTCC to last the life of your truck. They have a lifetime warranty and are made of a dense rubber which is designed to withstand consistent use.

expert reply by: Kyle S

0

Answer 1

I can help you with suspension enhancement that will work great on your 2015 Ford F-350 but since your truck has a service/utility body that would normally indicate you have a cab and chassis model truck that has a narrower 34 inch wide frame and for…

view full answer...

Answer 2

I will be more than happy to help you with a suspension enhancement system for your 2020 Ford F-350 but because your truck has a service/utility body the truck will have a narrower 34 inch wide frame and the Firestone Ride-Rite Red Label Extreme Duty…

view full answer...

Answer 3

The Draw Tite Front hitch part #65078 actually sticks out 2 inches past the front bumper of a 2017 Chevy Silverado 2500 like you have. I attached a picture I took from a different install video for this hitch (also attached) that shows this.

view full answer...

Answer 4

Hey Shawn. The 1-1/8" Diameter Hellwig Sway Bar item #HE73GR is going to reuse the factory end links on your 2014 Ram 2500 and is designed as a simple replacement for the stock sway bar. I recommend installing the thicker 1-1/4" Diameter…

view full answer...

Answer 5

Hey there Michelle! While weight distribution systems are supposed to get the truck and trailer as level as possible, they are not complete miracle workers and won't make both 100% level in all situations. In fact, Andersen has a section of the…

view full answer...

Answer 6

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 7

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will Timbren Rear Suspension Always Contact Axle on 2021 Ford F-350 Cab & Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching