What is the Purpose of Third Mounting Hole on Demco Hydraulic Brake Actuator w/ Electric Lockout
Updated 03/29/2022 | Published 03/27/2022 >
Products Featured in This Question
Question:
What is the purpose of the third hole that is between and lower than the two primary mounting holes? Is this for a bolt to secure safety chains?
asked by: Mark
Expert Reply:
The third hole on the Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs # DM62VR is for an additional bolt for mounting. The other two holes are required for mounting the actuator, the one you are referencing is optional. You could choose to drill a third hole to make use of this or just use the top two.
Safety chains are typically mounted to the trailer. If you need to add mounting brackets for safety chains you would need something like the # MB12 or # MB58.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Lippert Spindle Nut Kit w/ D-Flat and Tang Washers - For 2,200-lb to 4,400-lb Axles
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Q&A: Replacing A Dexter P-29 Axle Made Around 1999
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Surge Brake Boat Trailer that Makes Slamming Sound When Hitting Bumps
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Surge Brake Actuator Replacement Recommendation for Atwood Model 84132
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)




