Replacement Converter for PD4045CS to Allow Use with Lithium Battery  

I reached out to Progressive Dynamics and found that the PD4045LICSV is only capable of charging lithium batteries. In order to be able to charge both lead acid and lithium, you will need the Replacement Converter Section for Progressive Dynamics…

Hey Kim, thanks for reaching out! The Replacement Converter Section #PD4045CSV is the correct fit for your Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4045KA. This has a switch on it that…

Hey David, thanks for reaching out! The Replacement Converter Section for Progressive Dynamics Inteli-Power 4000 Series 45 Amp Power Center #PD4045CSV has an output of 14.6V.

You don't have to remove the jumper with the Replacement Converter #PD4045CSV. Using lithium batteries just switch to the LI and you're set.

Yes, the converter section of your #PD4045KA can be replaced with the #PD4045CSV. This is a direct replacement that will install exactly the same as the old one. This also includes a lithium switch so that you can easily change the charging profile…

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

Yes the #PD4045CSV can charge a LifePO4 Lithium Iron Phosphate battery when you switch it to Lithium mode. The other converter you mentioned was phased out since it was no longer needed due to the #PD4045CSV having a Lithium mode.

Thanks for the picture! The Replacement Converter Section item #PD4045CSV is the correct part you need to replace your PD4045KA converter. It is compatible with Lithium batteries you'll just have to flip the LI/LA switch. I linked the…

You will leave the switch on the Replacement Converter Section #PD4045CSV set to LA for lead acid battery. An AGM Battery #34276285 has a lead acid construction with fiberglass mats to keep acid absorbed between the lead plates.

We do offer a lithium-compatible converter that is a direct replacement for your existing #PD4045KA power center. You'd want to use part #PD4045CSV which would replace the converter section of your existing #PD4045KA Power Control Center.

The Replacement Converter Section #PD4045CSV is actually a replacement for the Progressive Dynamics 4000 Series AC/DC Distribution Panel #PD4045KA. The 45 Amp Progressive Dynamics Replacement Section #PD4645V is for Parallax/Magnetek model 6345, WFCO…

The Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center part #PD4045CSV has a lithium mode that when stitched on will provide a constant charge of 14.6 volts. It does not reduce the charge so you'd need to…