What are Grease Seal Dimensions for etrailer Axle # e45GR
Updated 03/21/2022 | Published 03/19/2022
Products Featured in This Question
Question:
What seals do I need for this axle. It appears to be a2.25 x 3.375 seal maybe?
asked by: Craig
0
Expert Reply:
You are correct the seal dimensions the trailer axle # e45GR uses are 2.25 inch by 3.375 inch and for a replacement would be # RG06-070.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Q&A: Looking for Pre-Greased 3,500 Idler Hub that is Galvanized for Trailer Axle
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Upgrading Trailer Axle Capacity - Do I Need To Replace Both Axles?
- Q&A: Recommended Pattern for Rotating Trailer Tires on Triple Axle Trailer
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Can MORryde CRE3000 be Used with 31 inch Wheelbase and 24 inch Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: Trailer Wiring Diagrams