bing tracking image
Q & A Icon

How to Remove the Middle Switch Cover of the Single Rocker Switch  

Updated 11/05/2026 | Published 02/27/2022

Question:

You did NOT show how to remove.....the rocker switch cover to be able to access screws to remove!!

0

Expert Reply:

When the Single Rocker Switch # 37213575 arrives you should just be able to remove the middle section. Sometimes the middle portion will shift and secure itself into place on the tabs that hold the switch in place. If this happens, you will just need to depress the two sections on the back to remove the middle section. I have included a picture that shows the two points you need to depress to get the switch off.

expert reply by:
0
Scott S
JR Products Single Rocker Switch Depress Points
JR Products Single Rocker Switch Depress Points
(click to enlarge)
Steve G. profile picture

Steve G.

11/5/2026

After switch has been installed how do you remove the switch cover to access the mounting screws without breaking the switch Thank You

Lazer S. profile picture
Etrailer Expert

Lazer S.

11/5/2026

@SteveG Well that's a very good question. You will still need to depress those tabs to get the switch cover off, so if I were doing this, I would use a penknife or something similar. Basically something fairly long (like 3") and as skinny as possible. You would need to do one side at a time though, so take your time. I would bet it's fairly frustrating to get done.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>