Drop Shank that Can be Used with Curt Trutrack Weight Distribution and 2-1/2 inch Hitch
Published 02/03/2022
Products Featured in This Question
Question:
I purchased a small toy hauler to pull behind my 2019 Ford ranger. It came with the Curt Weight distribution Hitch Item # C17507. But I want to tow this trailer behind my 2020 F250 and utilize the weight distribution system. But the F250 is way taller than the Ranger so I would need a shank that drops down lower. Is there a way to purchase a replacement head, shank and hardware to do this or do I need to purchase the whole setup? Also my F250 has a 2 1/2inch receiver and Ranger is 2.
asked by: Mark S
Helpful Expert Reply:
We have replacement drop shanks that you could use with your Curt system that would give you the drop you are wanting with the part # EQ94FR which can do a drop of up to 9 inches and was designed to fit a 2-1/2 inch hitch.
This would be only component you'd need to go with to give you the additional drop you need and is compatible with both your Curt WD system and your 2-1/2 inch hitch.
Product Page this Question was Asked From
Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control - 10,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Trunnion Bar
- TruTrack
- CURT
more information >
Continue Researching
- Q&A: Troubleshooting Brake Controller with OL Code when Brakes are Applied
- Q&A: Difference Between Curt Weight Distribution Systems C17500 and C17501
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Q&A: Replacement LP Gas Detector Recommendation For Older Protechtor 2001 Series LP Gas Detector
- Q&A: Surge Brake Coupler Recommendation for 2-5/16 Inch Hitch Balls
- Q&A: Replacement for Dexter 34044 Hydraulic Disc Brake Actuating Trailer Brake Coupler
- Q&A: Availability of Heat Strip or Heat Pump for Furrion Chill Cube RV AC
- Q&A: Recommended Longer Weight Distribution Shank To Allow Door Clearance On 2016 Ford Transit