Replacement Hub With An Out Bearing And In Bearings That Measure .74" and 1.25" For 5 On 4.5 Wheel
Updated 01/29/2022 | Published 01/28/2022
Question:
Looking for a hub that can replace one with a .74 out bearing and a 1.24 inner. Lug is 5 on 4.5. is on a home made trailer so have no idea what it came off of.
asked by: Caleb
Expert Reply:
We do have a replacement hub that can work. Unfortunately, it is not a 5 on 4.5. The only replacement hub we have that will fit your axles. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural, part # AH15450ECOMP. Going with these hubs will require you to get new wheels to match this lug pattern or cut off the spindles and weld on new spindles that will accommodate a different hub.
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Q&A: Trailer Spindle & Hub With 5 on 5-1/2 Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: How To Measure And Replace Everything In Your Hub Assembly