Max Entry Height that Torklift GlowStep Can Be Used with for 3 and 4 Step Versions

Question

Question:

For 3-step and 4-step TorkLift GlowStep Stow Nfoot Go Scissor Steps w/ Landing Gear 1 What is the max height with fully extended landing gear? Thanks in advance

asked by: Valentina

0

Expert Reply:

For the 3 step Torklift GlowStep with Landing Gear part # TLA7833 the max entry height is 34-1/2 inches and then for the 4 step version # TLA7834 the max height is 42 inches.

expert reply by: Jameson C

0

Answer 1

I've drawn up a little diagram below displaying the dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers #TLA7820. If you need anything else please let me know and I'd be happy to help.

view full answer...

Answer 2

We don't have a report of this fitment but you can determine if the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 will fit on your end by checking a few things. First, the entry height for your Lance 815 need to be…

view full answer...

Answer 3

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 4

I contacted the manufacturer and they stated the height of the Torklift Landing Gears, #TLA8000, is 6 inches at its lowest setting and between 9 - 10 inches on the landing gears highest settings.

view full answer...

Answer 5

The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.

view full answer...

Answer 6

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

view full answer...

Answer 7

Hey Rick. I've got three options for a 2019 Ford F-250 with a 6-3/4' bed. Which one you need depends on what kind of hitch you have. I have listed the options below; Factory Hitch - TorkLift Tie Downs - Front and Rear item #TL48DR Aftermarket…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

Hey Luis! So long as your Keystone has flat fiberglass walls then yes the MORryde Short Safe-T-Rail Telescoping RV Hand Rail item #MR54RV will work with your 5th wheel trailer. It is not designed to be used on corrugated steel walls. This rail…

view full answer...

Answer 10

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 11

The mounting brackets for the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear item #TLA7833 measure 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. The steps will bolt directly to your Lance 2021 1172 Truck Camper with…

view full answer...

Answer 12

In regards to the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7833, there is indeed a 6-1/2" gap between the first/last step and the mounting plate. This is needed in order for the steps to fully retract. It is not the intention of…

view full answer...

Max Entry Height that Torklift GlowStep Can Be Used with for 3 and 4 Step Versions

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching