U-Bolt Hole Spacing for Timbren TSR2000S04 Silent Ride Suspension System for Single Axle Trailers

Question

Question:

What is the distance between the holes for the u bolts?

asked by: Tim

0

Expert Reply:

The Timbren Silent Ride suspension system is designed for 1-3/4 inch diameter round axle tubes. I've provided a photo showing the hole spacing.

expert reply by: Mike L

0

U-Bolt Hole Spacing for Timbren TSR2000S04 Silent Ride Suspension System
(click to enlarge)

Answer 1

I have a great idea I think you'll like but we don't have a Silent Ride that will work with any size square axles as that is the standard shape of axles. Instead a Timbren Axle Less kit like the part #A20RS545 would be a great option to…

view full answer...

Answer 2

The weight capacity of the Timbren Silent Ride Suspension for Single Axle Trailers or Timbren Heavy-Duty Axle-Less Trailer Suspension are both shown as a total figure, for the pair. Therefore, the Timbren Silent Ride Suspension for Single Axle…

view full answer...

Answer 3

I have another option for you, but the closest standard axle we offer to your 86-1/2" hub face to hub face measurement is the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which measures 89" hub…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

U-Bolt Hole Spacing for Timbren TSR2000S04 Silent Ride Suspension System for Single Axle Trailers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching