Replacement Parts For Thule T2 Classic

Question

Question:

hello I need to change the screw and the gray piece on my t2 pro rack see photo but impossible to find! This is a screw who started at acutight knob at Hitch for jam the rack ! Help me

asked by: Christian

0

Expert Reply:

Unfortunately, those parts are not something we carry for your Thule T2 Bike Rack # TH9044-TH9046. The replacement parts we carry are:

Replacement End Cap for T2 Bike Carriers # 853-7017.

Replacement Hex Bolt for Thule T2 Classic Platform Bike Racks # 8537012.

Replacement 1/2"-13 Lock Nut for Thule Roadway Bike Carriers # 853-5584-02.

Replacement M12 Lock Washer for Thule Hitch Mounted Products # 956122159.

Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2.

Thule One-Key System Lock Cylinders # TH450200 for 2 or Thule One-Key System Lock Cylinders # TH450400 for 4.

I checked with Thule and the only screw I was able to find is # 853-5972 with the matching nut # 853-5973.

expert reply by: Bryce D

0

Answer 1

Thanks for the picture! I just spoke with my rep at Thule his solution was to replace it because the spring and the locking mechanism has gone out. They do not offer just the locking pin portion because it is riveted onto the frame. Instead you will…

view full answer...

Answer 2

The parts that you need for your Thule T2 Classic TH9044 are the following parts: - Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack #853595202 - Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402

view full answer...

Answer 3

Hi Todd, Like you said there isn't a Thule 1310 key, so I can't offer a replacement for that. The best option I have is to replace your lock cores with the Thule One-Key System Lock Cylinders - Qty 2 #TH450200.

view full answer...

Answer 4

Without seeing what's going on, the only lock of these two that is compatible with Thule products is the SilentACT #SHP2083. Manufacturers put a proprietary thread in the shanks of their bike racks that only allow certain hitch pins to work, and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Pete; all you need to do is put NSCG silicone grease G-624 on the #KH11813 cartridge. This block heater doesn't need any gasket maker, and you definitely do not want to apply it to the heating element. The clip will lock it in place so gasket…

view full answer...

Replacement Parts For Thule T2 Classic

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching