Truck Bed Wiring Harness For 2019 Ford F-250 Super Duty For Slide-In Camper

Updated 12/20/2021 | Published 12/19/2021

Products Featured in This Question

Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End

(720)

$8.37

Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 10' Long

(103)

$151.95

Question:

i have 2019 f250 XLT w/ 6.7 diesel that has no plug in the bed for slide in camper Lance 845 to be specific is there plug and play that will work and where should the plug be located in the bed

asked by: RICHARD W

Expert Reply:

To connect to the plug on your 2019 Ford F-250's truck bed camper, what you will do is use a 5th wheel/gooseneck wiring harness. The best location really depends on the camper, but most find positioning the harness towards the rear of the bed (closer to the tailgate) to be difficult because of limited clearance, so further forward in the bed would be the better option. For that you'll want a longer, 10 foot plug-in harness:

- Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds # C57010

The # C57010 will simply plug in between your truck's factory harness and 7-way at the rear, and allows you to continue using the factory 7-way at the bumper as well.

The only thing to keep in mind, since you mentioned Lance, is that your camper likely has a proprietary 6-way which won't plug into any type of 7-way (and there isn't any type of adapter) so you will want to just cut off the 6-way plug of the camper and replace it with the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706.

expert reply by: Kyle S