Replacement Door for Atwood 6 Gallon Water Heater GCH6A-10E

Question

Question:

Does your Replacement Black Door for 6 Gallon Atwood Water Heater, Item # AT91507, fit an Atwood/Dometic Model GCH6A-10ES 6 gallon water heater?

asked by: Stephen C

1

Helpful Expert Reply:

Yes, the Replacement Black Door for 6-Gallon Atwood Water Heater # AT91507 is the correct replacement door for your Atwood GCH6A-10E water heater. We also have it available in white with part # AT91386.

expert reply by: Scott S

1

Answer 1

Hey, Greg. Thanks for your question. It sounds like you may be looking at the water heater door latch #372225. These aren't part of the hinge for the door but keep it closed. Below is a picture of how its used and I've also included a link…

view full answer...

Answer 2

Yes, the Replacement Door for Atwood RV Water Heaters #AT91386 installs using two pins at the bottom. It is then secured shut using a Water Heater Door Latch #372225. I have included a picture showing the door attached to the pins.

view full answer...

Answer 3

We have checked with Atwood and can confirm for you that the Replacement Black Door #AT91507 or white #AT91386 are a confirmed fit for your 6 gallon Atwood GC6AA-10E water heater.

view full answer...

Answer 4

Yes, the Replacement Door for Atwood RV Water Heaters #AT91386 will fit and replace your Atwood GH6-6E door. It is also available in black #AT91507.

view full answer...

Answer 5

Hey David, thanks for reaching out. Atwood water heaters have been discontinued for quite some time as Atwood is no longer in business. We do still carry a water heater with a 6 gallon tank, the Dometic #DMC74FR. Even standard water heaters like this…

view full answer...

Answer 6

No, the grill/screen is not sold separately for the Atwood 6-gallon water heater door, so you would need to get the entire door if your screen is missing or broken. The correct part is one of the following, depending on if you want a White or Black…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Door for Atwood 6 Gallon Water Heater GCH6A-10E

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching