Can The Dutton-Lainson DL11004 Winch Use A 25 Foot Long Strap?

Updated 12/06/2021 | Published 12/05/2021

Products Featured in This Question

Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.

(108)

$28.94

Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs

(289)

$142.21

Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 1,500 lbs

(289)

$127.98

Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.

(25)

$41.16

Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.

(118)

$33.88

Question:

Will your worm gear reduction hand crank winch, Model #DL11004, accept a 25 foot strap, Model # DL24249 or are there other options? The winch description indicates it accepts only the 20 foot strap. Thank you!

asked by: Andy M

Expert Reply:

We are a little limited on what we have for worm gear winches, but if your application does not require the strap to be completely wound and can have 5 feet of excess hanging down/out, you can use the 25 foot strap # DL24249 with the Dutton-Lainson # DL11004. If you cannot, you will only be able to use the 20 foot # DL24242.

The only other hex drive winch we have with the worm gear will be the Dutton-Lainson # DL11011 that is designed to be used with wire rope. The 1/4" Diameter with Safety Hook # DL24100 will fit this nicely and get you the length you need, but this set up will only be rated up to 1,400 pounds of capacity.

expert reply by: Lazer S