Replacement Head for Blue Ox Weight Distribution System BXW2000

Question

Question:

The head that you recommended has the retainer on top. The head I have has the pins that are on the side. The bars install with a pin thru the side

asked by: Steve L

0

Expert Reply:

The replacement head for a Blue weight distribution system part # BWX2000 is the part # BXW4011. Then for a 2 inch ball you could use the part # C69FR.

expert reply by: Jameson C

0

Steve L.

11/23/2021

The head that you recommended has the retainer on top. The head I have has the pins that are on the side. The bars install with a pin thru the side

Reply

Jameson C.

11/23/2021

If your system has the pins on the side that secure the spring bars then you would want the part # BXW4012, but what the # BXW2000 comes with is the head with the pins on top of the bars.

Reply

Answer 1

Hey Chris, it sounds like you are looking for a replacement Blue Ox weight distribution head for your system which we have with the part #BLU54XR which fits the SwayPro systems.

view full answer...

Answer 2

Hello Harlow, thanks for reaching out. We do have the Replacement Head #BXW4011 which fits the Blue Ox SwayPro Weight Distribution Systems. Regrettably we do not carry the bolts that go with this. Your will need grade 5 zinc-plated 3/4”-10 x 4” hex…

view full answer...

Answer 3

To replace a hitch ball on the Blue Ox SwayPro Weight Distribution #BLU66FR you will need a 1-7/8" 12pt Thin Walled Socket #ALL643216. This socket will fit inside the opening for the nut that fastens the hitch ball. The socket will require a…

view full answer...

Answer 4

Sorry to hear about your troubles. Based off of the information you have provided me it sounds like your father in law had a Blue Ox SwayPro System. You're in luck because there are plenty of replacement parts available for this system. To start…

view full answer...

Answer 5

To use the Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW1000 with a vehicle that has a different height, you don't need to replace the entire system, you just may need a longer shank for increased rise or drop. I recommend using the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

view full answer...

Answer 9

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 10

Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…

view full answer...

Answer 11

Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…

view full answer...

Answer 12

Hi there Ron, it looks like as long as your 2024 Ford F-350 does not have dual rear wheels the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH39CR will fit. If you do have dual rear wheels, then you'd need to use the EcoHitch Hidden Front…

view full answer...

Replacement Head for Blue Ox Weight Distribution System BXW2000

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching