Is Demco Hijacker Autoslide 5th Wheel Hitch Compatible with Rota-Flex Pin Box

Question

Question:

will a demco auto slide work with a curt roto flex pin box I have a 2500hd stander bed chevy

asked by: Jerry L

1

Helpful Expert Reply:

Yes, the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider, like the 18K # DM8550034 for industry standard beds, will work with the Rota-Flex pin boxes when you use the Capture Plates # DM6171.

expert reply by: Jon G

1

Answer 1

Hello Jim, thanks for reaching out. We cannot recommend using the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR with any kind of cushioned pin box, such as the rota flex. The hitch ball allows for too much movement, and the…

view full answer...

Answer 2

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 3

In order to use a Demco Autoslide 5th Wheel Trailer Hitch on a 2020 Ram 2500 with Puck System you'd need the Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch part #DM99GV. In order to use a Demco Premier Series 5th Wheel…

view full answer...

Answer 4

Hey Jack, the Furrion Chill HE RV unit like the part #FR52PR is going to be your best solution. It is the quietest and draws the lowest amount of power at 11.2 amps compared to most similar options that are around 15. We've tested all of the…

view full answer...

Answer 5

Yes, you can use the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball item #DM8550046 with a Curt Rota Flex pin box like item #LC328330. The Recon is not compatible with rotating pin boxes but will work great with the Rota…

view full answer...

Answer 6

You will need the Demco Autoslide Capture Plates #DM6171 for the 5th Wheel Pin Box #LC176440 on your new Keystone Montana 5th wheel RV. These will replace the standard capture plates on your Demco Autoslide 5th Wheel Trailer Hitch #DM8550034.

view full answer...

Answer 7

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 8

Yes, you can! You will only need to install one of the 12V PWM Filters item #VGR64VR if you do it upstream before the circuit branches off to the separate cameras. You do not need one at each camera.

view full answer...

Answer 9

Since your dealer said your 2017 Ford F-250 short bed with a 6.7L diesel and 3.55 axle ratio can tow 16,500 lbs, you can tow a 5th wheel trailer that weighs a total of about 14,000 lbs without issue. You mentioned pin weight, and for a 5th wheel…

view full answer...

Answer 10

I attached a picture that shows the install instructions for the Demco capture plate adapter part #DM6171 for you to check out. You do have to remove the old screws to get the old plates off to install this kit.

view full answer...

Answer 11

No. The Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 are not designed to be used with any other pin box except the Rota-Flex. If you have a 5th wheel trailer that has a standard pinbox, you'll want to use the…

view full answer...

Answer 12

Yes, you are going to need the need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 in order to be able to use the Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw #DM89GV with your Lippert Flex Air Pin Box. These…

view full answer...

Is Demco Hijacker Autoslide 5th Wheel Hitch Compatible with Rota-Flex Pin Box

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching